TOP 3 Film Photographers Mistakes
Patience is not one of my many virtues and practice as always been my favorite over theory. Instead of taking the time to learn the essentials before starting, I usually go head down into it and comes what may! This behaviour has caused me disappointment, frustration, waste of time and money.
That’s why I have decided to be more thoughtful and cautious in my approach to photography and life in general. From these bad experiences came the idea to gather the 3 biggest mistakes I did so you can easily avoid them. Each mistake here is based on my personal experiences. I’m sure some of you may encounter similar difficulties so do yourself a favor and avoid some disillusions by taking a few minutes to read this.
Table of Contents
Not Loading The Film Correctly
This is probably the most embarrassing of all mistakes I did and the worst part is that it happened more than once! A couple of months ago when I started this project, loading a camera with a film was something completely unknown to me. The only experience with film in the recent years was with a disposable camera so we can easily agree that I had no idea how to deal with it.
Before buying my first camera, I wanted to get my hands on an SLR to see how it felt, so a friend lent me an Olympus OM10. It seemed pretty straight forward to me and didn’t bother asking him any explanations about loading the film.
I shot two rolls with and enthusiastically brought them to the lab. When I came back to collect my pictures the following day, my enthusiasm quickly turned into a great disappointment. Both rolls turned out blank, nothing, empty, adios! I was so excited by the idea to see those pictures but they were gone forever and there was nothing I could do about it.
My spontaneous reaction was to blame the camera because there was no way that I could have done something wrong with two rolls. Then I even considered that the lab could have messed-up but it never crossed my mind that I could have done something wrong. In any case, my faith in this camera was gone so I gave it back to my friend thinking it was faulty.
After this bitter failure, I got myself a Leica M6 which, I was sure, was not likely to fail on me as this modest Olympus did. Everything was fine, rolls were flying through and it was giving me complete satisfaction. But like in every love story, there are ups and downs. Our first down had to happen at some point and think you already know what follows next: Yes, it happened again, another blank roll!
This time things were a bit different though and I knew exactly what went wrong. When I rewind the film, I quickly noticed after a few spins that there was no resistance. Usually, you feel a tension when rewinding the film back into the canister, here I felt tension for the first 4 or 5 spins then nothing, I was turning but nothing was moving anymore. It meant that the film never moved after loading it into the camera. I kept shooting over and over the same frame.
How To Load a Film Camera
It’s a mistake that you can avoid very easily and I’m going to show what you should to pay attention to when loading film :
1. Once you have inserted the tip of the film inside the spool, make sure the teeth are engaged between the sprockets holes.
This will ensure that the film travels correctly when you action the advancement mechanism to move on the next frame. If there isn’t enough tension you can use the rewind knob to tighten the film’s position.
2. The film is now inserted in the camera and there is no way to open it to check what’s going on inside. Don’t worry, there is an easy way to determine if the film is moving forward or not.
When you use the film advance to wind the film, you simply have to check if the knob on the left (that you use to rewind the film) is turning. If it turns, good, it means that the film is properly engaged.
If the film is not moving, chances are that it’s was not engaged so you are good to open the camera and check what is wrong. This can also happen if the film breaks inside. It never happened to me but I know that can an issue too.
Not Exposing Correctly
If like me, you are coming from digital, chances are that you are used exposing for the highlights and then recover the shadows in post. Digital sensors are well known for being able to recover a lot of shadow details but don’t do so well at keeping information in highlights.
If you’ve never shot film before, there are a few habits you’ll have to change. If there’s one thing to remember is that film loves light and won’t be afraid in taking a few extra stops in the face!
How To Expose Colour Film VS Digital
With film, it’s the exact opposite than digital so you have to rethink your approach when measuring the light of your scene. Unlike digital cameras, film is very good at keeping details in highlights even if overexposed. The counterpart is that, if it was underexposed, you won’t be able to recover details in the shadows as a RAW file would allow to.
Overexposed image straight out of the scanner 
I lowered the exposure by 2 stops in Lightroom.
All films are not equal in terms of under-exposition. The most flexible are black and white and color film C-41. They allow you to underexpose by a few stops and still retain details in the shadows. There is one type of color film called “slide film” or sometimes referred at E-6 that doesn’t offer this flexibility. It requires much more precision when exposing. This is not the type of film to want to use if you are beginning. It’s also very difficult and expensive to get developed so I would suggest sticking with standard C-41 at the beginning.
Buying Expensive film
If you just opened to door of film photography, you must feel a bit lost by the amount of film to choose from and it’s normal. I was feeling the same at the beginning and couldn’t decide which film I should buy. I started reading reviews, checking pictures on Flickr etc….
After a while, you will notice the same names coming back such as Kodak Portra for color and Ilford HP5 or Kodak Tri-X for black and white film. These are the most popular but they are also pricey. If budget is not an issue for you can stop reading here. However, if you are concerned about the cost of each frames stay with me a bit more.
A Pro Film Doesn’t Make a Good Image
On my quest for the perfect film, I ended up on choosing Kodak Portra 400. The look of images I was seeing really appealed me and it didn’t take long before a box 5 rolls got delivered in my mailbox. Of course, quality comes at a price but if I wanted to create this kind of images I had to put the price.
So I went on shooting and was sure that it would get fantastic images thanks to this professional film. Then proudly handed over my roll freshly shot to my local lab to get it developed. As soon as I got the negatives back, I ran home to scan those images. My enthusiasm quickly vanished when the first images appeared on my screen. It was a real cold shower… These images had nothing to do with what I was expecting from this film.
Looking back I figured that the problem was not the film but my lack of experience. At the time, my knowledge of film was so limited that we could consider it inexistent. To get the most of a film, there are many factors that will impact the final result. We have seen earlier that exposure is one thing but the lens, quality of light, developing process and scanning will also play a major role in achieving this result.
Let’s be honest if you shoot with professional film but then play cheap, like I did, on development and especially scanning, you will never reach this quality. It’s like driving a Ferrari with cheap tires, there is no way that will get the optimal performance of your horse!
My 2 Favourites Cheap Films
As you are just starting, there is no point in buying the most expensive films on the market. Instead, you can use cheaper alternatives and get respectable results too. From my experience Agfa Vista 200 and Fomapan 200 and 400 are some of the best cheap film you can get today.
Once you’ll have more experience you should definitely use those more expensive films and try to send your work to pro labs if your budget allows you that luxury. They have all the equipment and expertise required to develop the most of your negatives. But while you’re still warming up and not sure if film is for you, stick with those affordable options for a while until you have gathered some skills.
Hi, I’m Vincent Moschetti! I love shooting film and talking about it 📸
You may also like
One Reply to “TOP 3 Film Photographers Mistakes”
Leave a Reply
You must be logged in to post a comment.
That’s true, I totally agree with you about the article “A Pro Film Doesn’t Make a Good Image”. Last week, I talked with my friend who has experienced analog photography for a long time. I asked him that should I use a budget film scanner, for example espon v370, to scan my negative films for saving money and then he said that is a big mistake because there are a lot of espects to be concerned when we try to reach the best result in analog photography like film storage, chemicals, film type, film scanner, lens, exposure time, light …. In case of my friend, he invested a used espon v700 with pro accessories but all results still not equal to lab.